Main page

History

Vehicle Application

Products

مستندات فارسی

Home

CARS THROTTLE BODIES

The Throttle Bodies have the task to make arrive the air mix with the gasoline inside the cylinder, with the minor loss of possible speed, between the outside and the inside.

Models: TI & TK

TI
Main Technical Features
 

Die-casted aluminum throttle body 43.0mm bore diameter Throttle driven by direct cam progressive opening spherical profile of the bore Allowing a better drive ability at the initial openings Throttle position sensor Throttle return spring at closing position By-pass circuit run by a stepper motor allowing idle control Connector for engine service circuits.

Application
1.2Engine / Iran Khodro Paykan, Saipa and Tata vehicles. The throttle body manages the air inlet to the engine cylinders. Each throttle opening corresponds to a certain air flow as well as a certain fuel flow delivered by the injector previously defined by the ECU. This allowing the proper ratio air / fuel
 

TK
Main Technical Features
 

Die-casted aluminum throttle body 45.0mm bore diameter Throttle driven by direct cam progressive opening Spherical profile of the bore allowing a better drive ability at the initial openings; Throttle position sensor Throttle return spring at closing position By-pass circuit run by a solenoid device allowing idle control Connector for engine service circuits.

Application
CNG engine for Saipa vehicle. The throttle body manages the air inlet to the engine cylinders. Each throttle opening corresponds to a certain air flow as well as a certain fuel flow delivered by the injector previously defined by the Engine Control Unit. This allows the proper air / fuel ratio.
 

Copyright © 2010 First Good Idea General Trading LLC. All rights reserved